Browse all practice questions for the Radiologic Technology Supervisor and Operator Practice Exam. Search by topic, open any question and review its full explanation, then test yourself in the practice quiz.

Radiologic Technology Supervisor and Operator Practice Exam course image
More practice questions

These questions are part of the practice quiz. Start practicing

  • Which of the following describes appropriate use of patient shielding?
  • Limited permit X-ray technicians are excluded from:
  • During X-ray film development, light or X-ray exposure causes the ______ in the emulsion to develop an invisible latent image.
  • Changing from Sp-100 calcium tungstate screens to Sp-400 high-rare-earth screens will reduce exposure settings and patient dose by what percent for the same image density?
  • Ionizing radiation could: 1) pass through a cell without producing any damage 2) kill the cell 3) lead to permanent changes in tissue which may result in demonstrable biological injury
  • Filtration provides benefits to the patient and radiographic quality. Which statement is true?
  • Which processing error causes radiographic films to appear yellow-brown and emit a sulfur-like odor?
  • If a worker receives a total effective dose equivalent exceeding 5 rems within 24 hours, what action is required?
  • Mid-density is usually measured around what optical density above the base-plus-fog level?
  • Which three items are monitored by the Processor Quality Control program?
  • Which practice helps protect reproductive organs during radiography?
  • Twenty-four hour notification means telephoning CDPH within 24 hours with prompt follow-up letter when individuals are exposed to an eye dose equivalent within 24 hours exceeding:
  • Darkroom fogging affects which portion of the density range most?
  • Which QC parameters should be tested annually?
  • Which of the following are used for annual testing of X-ray system filtration (HVL): 1) dosimeter 2) type 1100 aluminum sheets 3) semi-log graph paper
  • If humidity drops below the standard, what effect is expected on the film?
  • Which tube-detector geometry is used by third-generation CT scanners, where the X-ray tube and detectors rotate around the patient to collect views from many angular positions?
  • What term refers to the natural environment or normal illumination level in a space?
  • To obtain uniform density (+/-0.10 OD) over the film, the X-ray beam should be oriented relative to the bucky grid and film as:
  • Measurement of the radiation dose to the skin of the anterior chest is a reasonable indicator of:
  • The measured focal spot size is defined as the central axis measurement of the x-ray tube at the image receptor.
  • If humidity drops below 40%, the result to films will be:
  • Scratches on films are caused by:
  • A radiation worker accidentally receives 10 Sv full-body X-radiation dose. How many rads did he receive?
  • Which item is included in a quality assurance program to assess imaging quality?
  • Which term describes an x-ray component placed in the primary beam to preferentially absorb or eliminate the less penetrating x-rays before they reach the patient?
  • Which of the following is accomplished by appropriate filtration?
  • Freshly exposed sensitometric strip should be read with which device?
  • The conservative approach to creating radiation protection guidelines considers that the genetic effects of radiation constitute a __________ phenomenon.
  • Which of the following occur minutes to hours after exposure to ionizing radiation?
  • What is the source-to-skin distance for mobile radiography?
  • If a warped cassette produces what on the finished radiographs?
  • To limit stochastic effects, which statements are true for dose management?
  • The degree of film darkening and controlled density and contrast is controlled by which factors?
  • If developer temperature is too high during processing, which film outcome is most likely?
  • Which of the following factors can be directly influenced by x-ray personnel during day-to-day use of x-ray equipment?
  • HVL stands for what in X-ray beam quality testing?
  • Which practice helps prevent fogging of radiographic film during processing?
  • The unit of absorbed dose is expressed in which of the following?
  • In a QA program, which task should be performed every three months?
  • As much as what percent of the film darkening results from light produced by the intensifying screens?
  • What is the primary purpose of filtration in the X-ray beam?
  • X-ray penetration (quality) is decided by which of the following?
  • Which statement regarding filtration and image contrast is true?
  • The skin dose measured at the anterior chest during radiography is most indicative of which organ dose?
  • What is the primary rationale for gonad shielding in radiographic procedures?
  • The abdominal region accounts for approximately what percentage of all diagnostic X-ray examinations performed?
  • Which factors contribute to nonuniform radiation dose distribution within the body?
  • What radiographic device reduces scattered radiation in the patient and improves image quality but increases patient dose?
  • What humidity range should be maintained for film storage to preserve quality?
  • When X-raying very small children without photo timing, which approaches are recommended?
  • What happens to the nominal focal spot size as the x-ray tube target (anode) decreases?
  • For a given exposure, which option lists the correct dose value of 0.017 mrem?
  • Scattered radiation coming from the patient, compared to the primary incident radiation, is:
  • What does the data suggest about the dose-dependence of genetic mutational damage?
  • The projected focal spot size measured along the central axis of the x-ray tube at the image receptor is called the:
  • Which cell type is drastically depleted by relatively small radiation exposure (50–70 rem)?
  • Prior to exposure in mobile radiography, which safety statement is correct?
  • What is the recommended HVL for x-ray tubes operating below 50 kVp?
  • When the radiographer must stay in the room during exposure, which precautions are required?
  • Which statement about water filters is correct?
  • What are the two problems in SCREEN/FILM/CASSETTE SPEED MATCHING?
  • The collimator light beam allows the x-ray beam to be properly aligned with the correct patient anatomy and the __________?
  • What is the recommended HVL for x-ray tubes operating below 50 kVp?
  • Which of the following basic principles can be used to reduce radiation dose?
  • What is the purpose of standardized quality control tests performed at prescribed intervals?
  • Gross cellular effects from ionizing radiation exposure can include:
  • The frequency of retakes was highest in which body region?
  • Mid-density optical density is typically around what value above base-plus-fog?
  • Which of the following is a non-stochastic (deterministic) effect?
  • What is the performance criterion for the darkroom fog test?
  • Safelight is intended to prevent which problem during film processing?
  • What does GSD stand for in radiation protection?
  • Compared with CT, planar radiography doses are generally:
  • What is the basic principle of TIME in radiologic exposure?
  • Supervisors are responsible for display of the following documents in the place of employment or work:
  • Which of the following is the definition of half value layer (HVL)?
  • What is the light-sensitive material that coats radiographic film?
  • What is the function of the grid?
  • Which of the following is recommended regarding collimation?
  • How should processor standby units be verified?
  • For film archival, thiosulfate levels calculated from fixer retention testing should be ____ mg/cm2
  • What is the recommended storage temperature for photographic materials?
  • What does kVp determine in X-ray production?
  • How many 14 x 17 films must be processed daily to maintain consistency in most automatic film processors?
  • Which phenomenon is seen most frequently in growing tissue exposed to radiation?
  • Which combinations of practices reduce patient and operator dose while maintaining image quality?
  • Which component is used to shape the x-ray beam and limit exposure to the area of interest?
  • Approximately what percent of X-rays interact with intensifying screens?
  • What is the minimum source-to-skin distance for a mobile x-ray unit?
  • A person who holds a patient during radiographic exposure should satisfy which condition?
  • Which material is used for the vacuum envelope of an x-ray tube?
  • Which of the following are components of a typical collimator?
  • The coefficient of variation for phototime reproducibility is measured on 4-6 consecutive exposures. What maximum variation is allowed?
  • Which units measure dose equivalent?
  • Which two factors are identified as reducing patient dose in radiographic technique when selecting from the options provided?
  • How long must each required record of dose equivalent be kept?
  • The function of a _______ is to reduce the scattered radiation produced in the patient before it reaches the X-ray film.
  • Approximately what % of retakes are due to errors in exposure factors?
  • What accounts for most of the repeated radiographs (retakes/repeats) today?
  • Which units are used to express absorbed dose and dose equivalent, respectively?
  • Which factor influences the effective focal spot size most directly?
  • The unit used to express thiosulfate levels in fixer retention testing is measured in which unit?
  • Which of the following accessories always DECREASE pat RAD dose when used properly?
  • Which of the following factors influence patient radiation dose?
  • In quality assurance, which activity is used to assess image quality by analyzing retakes?
  • Which of the following is approximately the least radiation absorbed dose to the fetus that could cause spontaneous abortion?
  • What is the SID tolerance for collimator light field and X-ray field alignment testing?
  • Which statement best describes how distance affects x-ray beam intensity?
  • In screen/film contact testing, what type of copper/wire mesh tool and surface should be used?
  • For how long must records of maintenance and repairs of X-ray equipment be kept?
  • Which statement about grids is true?
  • Which metric is used to assess phototimer density reproducibility?
  • What is another name for the H&D curve, the input-output curve used in film sensitometry?
  • Which method is used to test film fixer retention?
  • What is the occupational dose equivalent limit for persons under 18 years of age?
  • Which factors affect the quantity of scattered radiation?
  • In radiographic practice, which item is classified as a hardware or technical error?
  • SID indicator accuracy must be within what percentage of the measured value?
  • What is the name of the input-output curve used to express the change in film density with changes in radiographic dose, and is also referred to as the H&D curve?
  • Which of the following are LONG TERM effects from exposure to ionizing radiation?
  • Which concept determines the barrier thickness (shielding) required to attenuate radiation to the specified level?
  • Approximately what percent of radiographic retakes are due to motion?
  • Increasing field size affects scattered radiation in which way?
  • Which instrument combination is used to monitor temperature and humidity in a darkroom?
  • How should the water flow meter accuracy be checked, and how often?
  • When the cathode end is directed toward the head, which projection would NOT take advantage of the heel effect?
  • What is the purpose of the copper/wire mesh tool in screen/film contact testing?
  • Which statement about beam energy is true?
  • An example of a deterministic effect is radiation-induced cataract formation.
  • Where is a personnel monitoring device worn during all working hours?
  • Which projection would NOT take advantage of the heel effect if the cathode end were aimed toward the head?
  • If the operator is required to stay in the room during scanning, which items should be worn?
  • The process by which an X-ray beam is reduced in intensity by absorption or scattering as it passes through material is termed:
  • Film speed (S) is defined as the reciprocal of the radiation dose required to produce a density of 1.0 above base and ______ densities.
  • Which factors can be directly influenced by x-ray personnel during day-to-day use of x-ray equipment?
  • What is the purpose of a sensitometric strip in film processing QA?
  • Can blue-light-emitting screens be used with green-sensitive film?
  • What temperature range is preferred for storing photographic materials?
  • During annual QA, which parameter is measured to verify X-ray central ray perpendicularity?
  • What is the relationship between operator exposure to scattered radiation and patient dose?
  • Each interaction with the screen produces a large number of what that causes the film to darken during development?
  • The dose to the patient is directly related to which factor?
  • When a beverage is spilled on a cassette, which component will have to be replaced?
  • Phototiming ensures what in chest radiography?
  • To minimize static marks on radiographic film, which handling practice is recommended?
  • In annual Gy/mAs testing, which statements are true? 1 test device is a dosimeter 2 test device is a homogeneous phantom 3 performance criteria is +/- 10%
  • A facility is conditionally exempt from silver recovery requirements if it generates less than 500 gallons per month of silver-containing solution which is: 1) hazardous only for silver 2) treated on-site within 90 days 3) silver concentration is reduced to less than 5 mg/L. Which statements are correct?
  • Which statement correctly compares abdominal radiography's share of exams vs GSD?
  • Which projection would NOT take advantage of the heel effect if the cathode end is aimed toward the head?
  • The size of the focal spot influences the image resolution.
  • Which statement describes collimation's impact on dose?
  • Darkroom humidity should be maintained in which range?
  • Static lag refers to a ghost image caused by residual latent image from previous exposure.
  • If the expectant mother is exposed to a significant amount of radiation, which risks in children have studies shown to increase?
  • Which mechanism is most responsible for scatter that contributes to image formation at diagnostic energies?
  • Which of the following is a genetic change as a long-term effect in future generations due to radiation exposure?
  • When and how should wash-water temperature and water filters be checked?
  • A radiation worker inside an enclosed area for 10 minutes at a rate of 100 mrem/hour will receive how much dose?
  • X-ray films have been designed to be most sensitive to which color in the blue-violet spectrum for use with calcium tungstate intensifying screens?
  • Gonad shielding must be used for patients who have not yet reached reproductive age.
  • How is film fixer retention tested?
  • Under which conditions is a 24-hour notification to the Radiological Health Branch required?
  • To minimize retakes, which approach is recommended?
  • What can developer solution or cigarette ashes produce on the radiographs?
  • What is the mid-density target in processor densitometry?
  • On a linear, non-threshold dose-response curve, where does the curve intersect the x-axis (abscissa)?
  • QA/QC records: which statements are true about review accessibility?
  • Who is responsible for establishing, reviewing, and annually updating the radiography procedures manual?
  • Grids with a ratio above 8:1 are recommended for use above what kVp level?
  • Approximately what percentage of retakes are due to errors in exposure factors?
  • One Gray is equal to how many joules per kilogram?
  • Which population should NEVER EVER hold patients during an exam?
  • Which interactions contribute to attenuation of x-rays inside the body during radiography?
  • Which practice is essential to produce satisfactory radiographs?
  • Before making an exposure with a mobile X-ray unit, which condition must be met?
  • What is the effect of all types of fog on the radiographic image?
  • Which of the following is NOT part of the silver recovery exemption criteria?
  • Which of the following will INCREASE attenuation of x-rays inside the body?
  • Which statement best describes the purpose of the inverse square law in radiation safety?
  • What is the recommended HVL for x-ray tubes operating between 50-70 kVp?
  • Which examinations are considered high bone marrow dose examinations?
  • Grow cellular effects from exposure to ionizing radiation can include: chromosome breaks, clumping of chromatin, and formation of giant cells or abnormal mitoses. Which option lists all of these?
  • The useful optical density (O.D.) range for radiographs should fall within which range? 0.2 to 1.0; 0.5 to 2.5; 1.0 to 3.0; 1.5 to 4.5
  • What is the proper interpretation of ALARA in dose management?
  • What is the tolerance for the density difference in densitometry?
  • Which condition must be satisfied for gonadal shielding to be appropriate?
  • What is the annual occupational dose equivalent limit as set by 10 CFR 20, for the lens of the eye?
  • Which description correctly describes the test device, performance criteria, and frequency for tank level checks, clean-up films, and clean crossover rollers?
  • Inherent filtration refers to filtration located in which part of the x-ray assembly?
  • Which statement accurately describes the effective focal spot?
  • Which component primarily accelerates electrons toward the target?
  • ABD region repeats represent what percentage of all repeats?
  • What term describes the emission of electrons from a heated tungsten filament?
  • During exposure, the latent image is formed in the emulsion by which component?
  • A statement about pressure damage: Photographic materials should be stored on their edge to prevent pressure damage.
  • Readings from a personnel monitoring device are considered to be which dose?
  • What is the most important factor in the production of scattered radiation?
  • What is the frequency for darkroom condition testing?
  • The secondary protective barrier includes which forms of radiation?
  • The target material of a general-purpose x-ray tube is primarily which element?
  • Which hypothesis describes the assumption that a dose–response curve derived from high dose-rate data may be extrapolated to low or zero dose?
  • Compared with calcium tungstate screens, rare-earth screens typically provide what level of patient dose reduction?
  • Which statement best reflects the contribution of all three factors to radiation biology?
  • A safelight should be carefully selected to match the film manufacturer's specifications and used with the recommended bulb wattage to avoid excessive what?
  • The total developer immersion time is listed for the smaller processor. What is the immersion time for the smaller processor?
  • How often must GRID UNIFORMITY/BUCKY GRIDS/Grid Cassettes/Clip-On Grids and Grid Alignment be tested?
  • Which statement best describes what happens to the beam when filtration is properly applied?
  • How often is a retake analysis recommended for radiographic practice?
  • Which artifacts can result from not handling radiographic films carefully?
  • Mid-density is usually measured around____ optical density (OD) above the base-plus-fog level.
  • For a declared pregnant worker, is interruption of pregnancy ever justified due to radiation dose from a diagnostic X-ray?
  • Which anatomic region accounts for approximately 25% of all diagnostic X-ray examinations performed, but nearly 40% of all retakes?
  • Which statement below is NOT listed as a primary cost saving of a QA program?
  • What is the term for the invisible image formed in the emulsion during exposure?
  • Which statement about dose fractionation and genetic damage is supported by animal studies?
  • The half-value layer (HVL) measures beam quality; for tubes operating above 120 kVp, the HVL is about which value?
  • Diagnostic X-ray beams are created as a spectrum of energies due to which interaction?
  • What is the approximate patient skin dose for CT examinations?
  • Inherent shielding refers to shielding that is built into which component?
  • Which of the following radiation-induced diseases can be differentiated from non-radiation-induced versions of the same disease?
  • What is the reason why children generally would be more sensitive to the effects of radiation?
  • ABD region x-ray examinations account for approximately what percent of all diagnostic x-ray examinations?
  • To achieve uniform film density within +/- 0.10 OD, how should the X-ray beam relate to the bucky grid and film?
  • If humidity rises above the standard, what effect is expected on film handling?
  • What is the quality factor for X-ray, gamma, or beta radiation?
  • Dose equivalent units include which of the following?
  • Which projection would NOT take advantage of the heel effect if the cathode was toward the feet?
  • Film speed (S) is defined as the reciprocal of the radiation dose required to produce a density of 1.0 above base and __________ densities.
  • If the distance from the X-ray source is halved, the exposure rate increases by what factor?
  • Which statement best describes the direct effect of radiation on DNA?
  • Which three items are monitored by the Processor Quality Control program?
  • In CT imaging, the patient skin dose is typically on the order of which unit?
  • About what percent of the X-rays interacting with intensifying screens actually interact?
  • Which statements are part of the Bergonie and Tribondeau law?
  • How should photographic materials be stored to prevent pressure damage?
  • What does smoking produce and what does it do to the film?
  • Which device is primarily used to reduce scatter radiation reaching the film?
  • If imaging is performed with film alone (no intensifying screens), what is true about exposure and patient dose?
  • Which monitoring device does not provide a permanent record of exposure?
  • Is a dead-man type exposure switch permitted for mobile radiography?
  • QC parameters that should be tested annually include:
  • For a phototimer to function properly, which actions must the technologist perform?
  • What is the primary effect of using intensifying screens in radiography?
  • Which tube-detector geometry is used by third-generation CT scanners where the X-ray tube and detectors rotate around the patient to collect views?
  • How long must occupational dose records be preserved?
  • The replenishment formulation and rates in automatic film processing are designed to compensate for which factors?
  • Which processing error causes films to turn black with poor image contrast?
  • Which of the following lists all factors affecting scattered radiation?
  • Which combination is not appropriate for dose reduction?
  • The length and width of the x-ray beam as projected down the central axis of the x-ray tube is called:
  • Which events occur within fractions of a second after exposure to radiation?
  • Which of the following occur within fractions of a second after exposure: absorption of radiation energy; formation of active radicals; biochemical changes in cells?
  • RADIATION not serving a purpose, which includes leakage and secondary radiation (scatter) is known as:
  • What are the three controls on the x-ray machine?
  • Operator exposures from CT examinations are typically very low.
  • Because of their small size, radiography of infants and very small children may not be possible with X-ray equipment utilizing which component?
  • The part of the X-ray beam that has gone through the patient and reaches the image receptor is called which term?
  • A family member stood in a hallway for 20 minutes. The exposure rate at the site was 0.5 mrem per hour. How much radiation did the family member receive?
  • Which capability is associated with higher mA capacity for 3-phase/high-frequency generators?
  • The REPEAT RATE for inexperienced or careless x-ray personnel is equal to or greater than which percentage?
  • What term describes radiation not serving a purpose, including leakage and scatter?
  • How often should an analysis of the number of retakes be performed?
  • 0.15 Sv is equal to how many rem?
  • What term describes the optical density of film due to base density plus the effect of developer on unexposed silver halide crystals?
  • If humidity drops below the standard, what will occur during film processing?
  • Which statement best describes the scope of the x-ray equipment performance evaluation?
  • Approximately what percentage of the incident photons will emerge from the patient unaffected to form the radiographic image?
  • For daylight systems, which items should be checked and reported?
  • Which statement is true about field size and scattered radiation?
  • OD stands for which term in film density measurements?
  • What is the function of the primary protective barrier?
  • GSD is an acronym used in radiologic protection. What does GSD stand for?
  • If QC tests indicate issues, what is the recommended response?
  • Which combination of features is required for mobile X-ray exposure switches?
  • What is the main purpose of a filter?
  • For how long must records of maintenance and/or repairs of x-ray equipment be kept?
  • How often should fixer retention be tested?
  • Approximately what percentage of the energy deposited in the target by electrons is converted to x-rays?
  • What should phototime/exposure time be checked for mostly?
  • Which parameter reflects how quickly film is moved through the automatic processor?
  • Which factors determine the quantity of scatter radiation?
  • Which statement about the 5 cm proximity criterion is true?
  • What term defines the difference in optical density between light and dark areas on a processed radiographic film?
  • Which of the following are considered X-ray accessories?
  • Which statement about x-ray generator configurations is true according to the material?
  • Which of the following are considered x-ray personnel errors when classifying reasons for repeated films?
  • What is the purpose of STANDARDIZED QUALITY CONTROL (QC) TESTS?
  • Which radiobiologic effect is most frequently observed in growing tissue exposed to ionizing radiation?
  • How do you select the primary factors? What do you need to consult?
  • Which pair of tissues has radiographic densities approximately equal to water?
  • The frequency of retakes was highest in which body area?
  • Reviewing and updating the FACILITY PROCEDURES Manual shall take place at least:
  • Which of the following is not considered a long-term effect of radiation exposure?
  • What is the number one cause for retaking a film?
  • Which of the following statements about semi-annual testing for collimator light field and x-ray field alignment is correct?
  • According to the LINEAR Hypothesis, what is implied about radiation damage at any dose?
  • If photo timing is not available when imaging very small children, which combination of actions is recommended?
  • What are the 3 controls on the x-ray machine?
  • For imaging very small patients, which device is often not suitable due to their small size when using standard radiography equipment?
  • What is the primary purpose of using a grid in radiography?
  • Which barrier is specifically designed to attenuate leakage and scatter radiation in a radiology facility?
  • What is the acceptable optical density (OD) range?
  • Which statement best describes the effect of added filtration on the x-ray beam?
  • When x-raying a patient with emphysema, which adjustment to exposure settings is recommended?
  • In densitometry, what does 'Base + fog' refer to?
  • The WATER FILTERS of the QC program are made to prevent build-up of particulates. These filters should NOT allow particles larger than ______ microns to pass.
  • If the gonads are properly shielded with 0.5 mm lead equivalent, approximately what percent of the incident primary beam radiation dose can the gonads still receive from internal scatter?
  • Which of the following factors influence patient rad dose?
  • Which units are used to express occupational dose equivalents in radiologic protection?
  • For animal experiments it is estimated that as little as ______ rads delivered to the embryo/fetus can cause deleterious effects.
  • Which statement best describes a linear, non-threshold dose-response model?
  • For 10 minutes, an individual received 120 mrad/hour dose rate; how much exposure did the person receive?
  • Genetic mutational damage from radiation shows what kind of relationship with dose?
  • Which factors can be directly influenced by x-ray personnel during day-to-day use of x-ray equipment?
  • For SID indicator accuracy, it needs to be within what tolerance of the measured value?
  • QA and QC records include which statements? The records must include all QC tests on x-ray and ancillary equipment, written records must be maintained for seven years, and records must be available for review by all agents of the RHB. Which statements are correct?
  • According to the inverse square law, if you double the distance from the X-ray source, the exposure intensity changes by what factor?
  • In radiology, which unit is commonly used to express absorbed dose in the context of the source material?
  • Which statement best describes the relationship between mitotic activity and radiosensitivity?
  • Which interaction(s) contribute to attenuation of diagnostic x-rays within the body?
  • Approximately what percentage of the energy deposited in the target by electrons is converted to x-rays?
  • The time lag between initial exposure to ionizing radiation and the first clinically detectable effects is called the latent period.
  • The period for preserving other required records following an occurrence?
  • What is the lead-equivalent thickness described for gonad shielding?
  • Damage to the INDIVIDUAL irradiated is termed:
  • Even a small fingernail mark may ____ screens.
  • How does operator exposure to scattered radiation relate to the dose received by the patient?
  • When & How should the Wash-Water temperature & The WATER FILTERS be checked?
  • The dose to the patient is directly related to which factor?
  • Which equation correctly represents the inverse square law for radiation intensity with distance?
  • Which QA/QC guidelines should be checked daily?
  • According to the line-focus principle, using a small effective focal spot is associated with high anode heating, and as the target angle decreases, what happens to the effective focal spot?
  • What is the purpose of testing screen/film contact in radiographic QA?
  • Measurement of the radiation dose to the skin of the anterior chest is a reasonable indicator of dose to which structure?
  • Absorption of x-ray photons in a patient’s body is primarily from which interaction?
  • Which of the following radiation-induced diseases can be differentiated from non-radiation induced versions of the same disease?
  • What is the optimum target-to-film distance for most radiographic examinations?
  • In automatic film processing, replenishment addresses which categories?
  • Darkroom environmental condition combination recommended?
  • Which of the following are advantages of using a high kVp technique?
  • Which measures are required if the operator must remain in the radiography room during an exposure?
  • How is film washing time measured?
  • Films moved rapidly can produce which artifact?
  • What is the Sievert equivalent of the lens annual limit of 15 rem?
  • Immediate notification is required for a shallow-dose equivalent to the skin or extremities of how many rads?
  • Which describes the average accuracy of a thermoluminescent dosimeter?
  • Which statement is true about mitotic activity and radiosensitivity according to Bergonie and Tribondeau?
  • What is the performance criterion for darkroom fog testing?
  • 24-hour notification is required if a shallow-dose equivalent to the skin or extremities exceeds what amount?
  • Which body region has the highest retake frequency?
  • The radiation exposure (intensity) measured by an ionization chamber at 90 degrees from the patient at one meter is about what fraction of the incident radiation?
  • For personnel monitoring, which two items are considered primary or sufficient?
  • What is the maximum permissible aluminum equivalent of the table top or front panel of a vertical cassette holder at 100 kVp?
  • What is the minimum source-to-skin distance for a mobile x-ray unit?
  • How often is screen/film contact testing performed?
  • Which of the following are SHORT TERM stepwise effects of radiation exposure? 1) life-span shortening 2) primary radiochemical reactions 3) functional damage of cells
  • At what body-part thickness is the use of a grid recommended?
  • Which population should NEVER hold patients during a radiographic exam?
  • A facility is conditionally exempt from silver recovery requirements if it generates less than 500 gallons per month of silver-containing solution which is:
  • In annual QC, which parameter is used to verify proper grid alignment?
  • Which of the following are TRUE regarding daily checking processor developer solution temperature?
  • Which of the following are LONG TERM stepwise effects of radiation exposure? 1) damage to genetic structures 2) cancer 3) cataract formation
  • Irradiation of the bone marrow is most likely to cause which of the following effects?
  • Total filtration is defined as the sum of inherent filtration and added filtration.
  • Dose equivalent is defined as the product of the absorbed dose in tissue, the quality factor, and other modifying factors.
  • When remaining in the room during CT scanning, which two items should be worn?
  • Which statement about film handling is true?
  • Which statement best describes the effect of using high kVp on the radiographic exposure?
  • Which device reduces scattered radiation produced in the patient but increases the dose to the patient?
  • What is a typical range of kilovolts for diagnostic radiography?
  • Where should all photographic chemicals be placed?
  • Which of the following are among long-term effects observed from radiation exposure?
  • For how long must QA/QC written records be retained?
  • Which of the following is a genetic effect from exposure to ionizing radiation?
  • What is the SI unit commonly used to express dose equivalent limits?
  • Which of the following are requirements for mobile X-ray equipment exposure switches?
  • The QC water filters are designed to prevent particulates; they should not allow particles larger than how many microns?
  • Daily checks of film processing include visual inspection of which component as part of evaluating washing time?
  • Which statement best describes radiation-induced mitotic delay?
  • Which term describes electron emission due to heating of the cathode in an x-ray tube?
  • Which of the following are considered long-term effects of radiation injury?
  • Which thermometers should NEVER be used due to risk of contaminating processing solutions?
  • What is the normal lead-equivalent thickness for protective gloves?
  • Energy of scattered radiation relative to the primary beam?
  • How often does SCREEN / FILM / CASSETTE SPEED MATCHING need to be evaluated?
  • Which statement best describes a low-dose radiography approach?
  • Supervisors are responsible for display of the following documents in the place of employment or work:
  • Most occupational exposure comes from which source?
  • Approx. 5% of the incident x-ray photons emerge from the patient to form the radiographic image, which is termed___________?
  • Approximately what percentage of incident photons emerges from the patient to form the image?
  • Which storage guideline is correct for photographic materials?
  • If a worker receives a total effective dose equivalent exceeding 5 rems within 24 hours, the supervisor is required to:
  • Under which conditions must gonads be shielded?
  • What is measured by a sensitometric strip?
  • How often and under what criteria should the replenishment rate for developer and fixer be checked?
  • Which one does NOT affect the patient dose?
  • QA and QC records: which statements are true?
  • In semi-annual collimator light field and X-ray field alignment testing, which test devices are used?
  • Regarding daily checking of the processor developer solution temperature, which statements are true?
  • Which of the following cellular effects can result from exposure to ionizing radiation (including chromosome breaks, chromatin clumping, and abnormal mitoses)?
  • 100 mrem/60 min × 10 min equals how many mrem?
  • What percent of all repeats come from ABD region films?
  • To reduce patient radiation dose, the radiographic technique chart should use which combination of kVp and mAs?
  • Which of the following is accomplished by appropriate filtration?
  • What purpose do standardized QC tests serve?
  • Which are the long-term, dose-related effects of radiation exposure?
  • What is the regulatory monthly occupational exposure limit for a declared pregnant worker?
  • What is the major problem encountered in most darkrooms?
  • The genetically significant dose is dependent upon which of the following factors?
  • Which practice best reduces patient exposure while maintaining image quality?
  • Which choices correctly identify the factors that determine the quantity of scatter radiation?
  • Which projection is preferred in scoliosis imaging to minimize breast dose?
  • Which statement best defines remnant radiation in radiography?
  • Inaccurate replenishment of processing chemicals primarily affects which film characteristic?
  • What must anyone holding a patient wear during an X-ray?
  • Which equipment must be included in a quality assurance program?
  • Darkroom film fogging must be eliminated because it causes which change in film contrast?
  • An important part of any QA program, to be done every THREE MONTHS, is: 1) checking water filters 2) checking film developer temperature 3) film retake analysis 4) grid uniformity and alignment
  • Which methods are recommended to reduce breast radiation dose during scoliosis examinations?
  • Why are children more sensitive to radiation than adults?
  • Which device is used to measure accumulated radiation dose over time?
  • Which examinations require the use of gonad shields for male patients unless an x-ray supervisor specifically requests that gonad shielding not be used?
  • Using high kVp technique has what effect on the heat load in the x-ray tube?
  • What is defined as the density difference between light and dark areas on a processed radiograph, and can be read from the characteristic curve?
  • Based upon animal experimentation, the following generalizations may be made regarding genetic effects from exposure to ionizing radiation: 1. genetic mutational damage is more severe if a given radiation dose is fractionated over a period of years or decades 2. there is no indication of a threshold dose below which genetic damage does not occur 3. the degree of mutational damage seems to be dose-dependent
  • Regarding film handling, which statements are true?
  • The development/processing produces a visible pattern on the finished radiograph. Which color is typically observed?
  • A facility is conditioned exempt from silver recovery requirements if it generates less than how many gallons per month?
  • According to the line-focus principle, decreasing the target angle results in what change to the effective focal spot?
  • Which accessory is used to protect reproductive organs during X-ray exams?
  • 1 Sv is equivalent to how many rem?
  • Which parameter does NOT affect the patient dose?
  • In radiography, the patient (body part being x-rayed) is the main source of which type of radiation?
  • When should Processor Quality Control be carried out?
  • Which term describes a dose-response relationship where there is no safe level, and any exposure carries risk?
  • For mobile equipment, which provisions are correct?
  • What is the name of the unit for the maximum crest voltage between the anode and cathode of an X-ray tube, which determines the beam's penetrating ability?
  • How often are processor transport times checked?
  • Which of the following are considered high bone marrow dose examinations?
  • What temperature range is recommended for storing photographic material?
  • Which combination of grids is recommended for pediatric radiography?
  • The primary exposure factors in radiography are:
  • How does skin pigmentation affect exposure factors?
  • Which statement describes reproducibility in QA measurements?
  • Which statement about gonad shielding is true?
  • In the context of radiation protection philosophy, the term used to describe that any amount of radiation carries some risk of genetic effects is:
  • Approximately what percentage of radiographic retakes are due to positioning errors?
  • Where does the heel effect distribute more radiation intensity?
  • What is the developer temperature test, device, criteria, and frequency?
  • Developer temperature test details: frequency and device?
  • Is interruption of pregnancy ever justified because of radiation dose to embryo/fetus during a diagnostic X-ray examination?
  • Which X-ray accessory is used to shape the size and geometry of the x-ray beam?
  • Which four elements are the primary exposure factors in radiography?
  • Under which condition should gonadal shielding be used?
  • Regarding screen/film contact testing, which combination statements are true?
  • Stochastic effects are characterized by which property?
  • If the distance between the source and image receptor is doubled, by what fraction is the intensity reduced?
  • What does the inverse square law state about radiation intensity as distance from the source changes?
  • Which processing error causes films to look milky and slowly darken over time?
  • A warped cassette produces what type of unsharpness on finished radiographs?
  • How often should the screen/film contact be checked?
  • Bone-marrow elements that are the most severely depressed after irradiation are:
  • Which two aspects are monitored monthly for film processing QC?
  • The SI unit of absorbed dose is what?
  • HVl units are typically expressed in which of the following?
  • What is the recommended HVL for x-ray tubes operating above 70 kVp?
  • Gonad shielding should be used during radiographic exams when feasible and it does not interfere with diagnostic information.
  • SCREEN LAG refers to:
  • Irradiation of the bone marrow will result in which effect?
  • How should the water flow meter accuracy be checked, and how often?
  • Which statement best describes proper handling of radiographic film to protect quality?
  • The function of a ______ is to reduce the scattered radiation produced in the patient before it reaches the X-ray film.
  • Each other required record must be preserved for how many years following the date of the occurrence?
  • Which statements are true regarding testing for screen/film contact?
  • How does rising humidity above 60% affect the film?
  • Which of the following devices have the disadvantage of 'no permanent record' of radiation exposure? 1) pocket ionization chamber 2) film badge 3) thermoluminescent dosimeter (TLD)
  • What are the recommended storage conditions for finished radiographs?
  • For 10 minutes, an individual received 120 mrad per hour dose rate. How much exposure did the person receive?
  • Which of the following will INCREASE attenuation of x-rays inside the body?
  • Which 24-hour notification threshold applies to total effective dose?
  • For animal experiments it is estimated that as little as ______ rads delivered to the embryo/fetus can cause deleterious effects.
  • Leakage radiation refers to radiation that...
  • Which of the following constitutes an X-ray equipment and accessories failure?
  • TRUE regarding irradiation of fertile females?
  • Which factor is NOT part of the Bergonie and Tribondeau law?
  • The development/processing produces a visible pattern on the finished radiograph primarily as which density pattern?
  • In pediatric radiography, which component can be omitted to reduce patient radiation dose?
  • The type of dose response curve associated with cataract formation is:
  • What is the approximate range of potential difference used in diagnostic radiography?
  • Which thermometers should never be used due to contamination risk?
  • X-ray films designed to be most sensitive to which in the blue-violet spectrum for use with calcium tungstate intensifying screens?
  • Genetic radiobiological effects are manifested through which mechanism?
  • An example of a radiographic study using natural shielding to decrease radiation to the ovaries is:
  • Which region’s imaging exam is associated with a large share of GSD despite only 25% of exams?
  • The coefficient of variation of exposures shall not be greater than what percentage on 4-6 consecutive exposures?
  • Remnant radiation is the radiation that forms the radiographic image after passing through the patient.
  • For the blue-green spectrum, films are sensitive to light when used with which type of intensifying screens?
  • Each interaction produces a large number of what that causes the film to darken during film development?
  • Where does the heel effect distribute more radiation intensity on the image receptor?
  • Open packages of photographic film should be stored at what humidity range?
  • The spinning target of a general-purpose x-ray tube is primarily composed of which element?
  • What is the acceptance criterion for Light & X-ray Field Alignment distance accuracy?
  • Which statement about intensifying screen speed is true?
  • When processing a freshly exposed sensitometric strip daily, what instrument should you read it with?
  • Which statement about repeat rates for experienced x-ray personnel is true?
  • Which component absorbs scattered radiation before it reaches the image receptor?
  • The conservative approach to radiation protection regards genetic effects as what type of phenomenon?
  • What are the 3 controls on the x-ray machine?
  • In the dose-response curve, the point where it intersects the abscissa below which there is no detectable effect is called the:
  • Nonstochastic effects have what characteristic?
  • How much time should be spent in the darkroom before testing for darkroom fog?
  • Which device is used for testing screen/film contact?
  • What is the material placed in the useful beam to absorb preferentially the less penetrating radiation?
  • An employee is exposed at a rate of 100 mrem per 60 minutes for 10 minutes. What is the resulting dose in mSv?
  • Which units measure dose equivalent?
  • Annual verification of X-ray beam perpendicularity and SID indicator accuracy uses a tool that measures which pair?
  • Daily QA checks for film processing include which combination?
  • Which of the following are cited as technical advantages of 3-phase and high-frequency generators over single-phase generators?
  • Which interaction is more likely to occur at low energy photons in bone and is responsible for high contrast in radiographs?
  • If the operator stands behind a portable shield, the approximate total dose reduction would be about:
  • What humidity range should be maintained to optimize film quality and minimize static marks?
  • Where should a personnel monitor be worn?
  • What are the three controls on the x-ray machine?
  • What does the size of the focal spot influence?
  • Which items are used for annual testing of X-ray system filtration (HVL)?
  • In scoliosis imaging, which option best reduces breast dose when feasible?
  • Which combination of QC test records must be maintained?
  • X-ray examination of the abdominal region accounts for 25% of all radiography, but contributes over ______% of the GSD.
  • Which X-ray interaction with matter predominates in soft tissue above 80 kVp?
  • Personnel monitoring device readings primarily indicate which type of radiation dose?
  • What is the unit for the maximum or crest value of the electrical potential difference between the anode and cathode of an X-ray tube, which determines the maximum penetrating ability of the X-ray beam?
  • Which of the following is NOT an advantage of using a higher kVp technique?
  • What barrier is designed to attenuate the primary useful beam in radiographic facilities?
  • Film badges are used to measure occupational exposure. Which statement is true?
  • How should photographic chemicals be placed for storage?
  • Which types of thermometers should NEVER be used for the temperature because of the risk they have in contaminating processing solutions?
  • Which of the following can produce film fog?
  • Finished radiographs should be stored at what temperature and humidity?
  • The density of all patient-equivalent phantom films should be within what percent of the average density?
  • Which QC parameters should be tested annually?
  • Which daily QC device should be evaluated to ensure film quality?
  • What is the most important factor in the production of scattered radiation?
  • Which group of items is essential for accurate radiographic technique and image quality?
  • Are operator exposures from CT examinations very low or high?
  • Can blue-light-emitting screens be used with green-sensitive film?
  • For archival storage, the amount of retained thiosulfate should be less than how many mg per cm2?
  • What is the name of the process by which an X-ray beam is reduced in intensity by absorption and scattering as it passes through matter?
  • Which processing condition is most associated with images turning excessively dark and low contrast?
  • In QC testing, HVL is used in reference to filtration. True or False?
  • A barrier used to attenuate stray radiation is termed?
  • Each required record of dose equivalent received by occupational workers must be kept (preserved):
  • Which type of filtration includes the x-ray tube and its housing?
  • Approximately 5% of the incident x-ray photons that emerge from the patient to form the radiographic image are known as what?
  • What is the recommended optical density (O.D.) range for the photographic process?
  • Is the CT beam well collimated?
  • What device is used to check the processor temperature during daily checks?
  • Which of the following correctly describes a beam that consists of a spectrum of energies?
  • On a linear, non-threshold dose-response curve, where does the curve intersect the x-axis (dose axis)?
  • Sensitometric strips should be exposed to which type of light?
  • To minimize patient dose in pediatric radiography, which grid characteristic is preferred?
  • The spinning target of a general purpose x-ray tube is primarily composed of_________.
  • What is the recommended source-to-skin distance in mobile radiography?
  • Twenty-four hour notification requires contacting which agency?
  • Open film packages humidity range?
  • What does kVp determine?
  • What is the function of a grid?
  • Which items are included in the annual QC parameters?
  • Which value defines a high radiation area when measured as dose rate in 1 hour at the specified distance?
  • For a declared pregnant worker, what is the maximum exposure they should never exceed?
  • Destructive changes in body molecules which result when a specific molecule such as DNA is acted upon directly by radiation.
  • The imaging concept involving rotation of the X-ray tube around the patient to collect multiple views is known as rotate-rotate technology. Which description best matches this concept?
  • Which of the following are under the technologist's direct control in routine practice?
  • What happens to beam intensity when the distance between the radiation source and the object increases?
  • Which statement describes reciprocity failure in film?
  • What is the annual occupational dose equivalent limit for the skin and extremities?
  • In radiography, the patient is the main source of which type of radiation?
  • Primary cost savings of a QA program include:
  • To reduce patient and operator dose while maintaining image quality, which combination is recommended?
  • How often should darkroom fog be tested?
  • Which devices have the disadvantage of no permanent record of radiation exposure?
  • How often should processor transport times be tested?
  • Darkroom fogging primarily affects contrast in which density range?
  • What is the maximum permissible fetal dose for a declared pregnant worker?
  • What is the test device used for the X-ray Beam, Bucky Motion and Centering?
  • The SI unit of absorbed dose is the gray. One gray equals how many joules per kilogram?
  • What is the primary process by which x-rays are produced?
  • The decrease in radiation intensity with distance follows which physical law?
  • What will changing the distance of the Target-to-Skin distance do to the patient if its decreased from 40 inches to 38 inches?
  • Which of the following combinations cause the films to smell and turn yellow over time?
  • Why should film fogging be eliminated?
  • As much as what percent of the film's darkening is due to light emitted by the intensifying screens?
  • Patient skin dose for CT examinations is usually on the order of which range?
  • What minimum distance should the operator maintain from the patient and away from the useful beam?
  • Which of the following is the primary process by which x-rays are produced?
  • In radiology facility terminology, an area outside restricted area but with access limited by the licensee is known as which area?
  • What is the average accuracy of a film badge?
  • What is the annual occupational dose equivalent limit for the skin and extremities?
  • Twenty-four hour notification means telephoning CDPH within 24 hours with prompt follow-up letter when individuals are exposed to an eye dose equivalent within 24 hours exceeding:
  • Which statement best describes absorbed dose versus dose equivalent?
  • The genetically significant dose is dependent upon which combination of factors?
  • HVL stands for Half-Value Layer.
  • Operator exposure from CT exams is generally very low because: 1) CT beam is well collimated, 2) scattered radiation is confined to the exam room, 3) operators control the fluoroscopic beam.
  • Which practice is not considered a standard protective measure for radiography personnel?
  • Light & X-ray Field testing can be performed using which tools?
  • How long must each required record of dose equivalent received by individuals be kept?
  • Retake analysis is recommended how often?
  • QC parameters that should be tested monthly include which of the following?
  • For archival storage, how much fixer solution is required?
  • Which is the total exposure when the dose rate is 60 mrad per hour and the exposure time is 20 minutes?
  • What is the usual range of diagnostic x-ray tube anode angles?
  • Which of the following cannot be directly influenced by x-ray personnel during day-to-day use of x-ray equipment?
  • Which combinations of factors influence the biological effects of radiation?
  • HVL measures the thickness of which material required to reduce the X-ray beam by 50%?
  • For annual Gy/mAs testing, which statements are true?
  • What is the best way to evaluate GRID UNIFORMITY, BUCKY GRIDS, GRID CASSETTES, CLIP-ON GRIDS, and GRID ALIGNMENT?
  • Which examinations require the use of gonad shielding for male patients unless an x-ray supervisor specifically requests shielding not be used?
  • How often should the built-in thermometer accuracy be checked with a calibrated thermometer?
  • Which option best describes a condition that is not one of the three primary x-ray machine controls?
  • Gonadal shielding with 0.5 mm lead-equivalent shields reduces gonadal radiation dose by approximately what percent?
  • Where is the pocket chamber worn in personnel monitoring?
  • Rare-earth intensifying screens require films sensitive to which color spectrum?
  • Which of the following is approx. the least radiation absorbed dose to the fetus that could cause spontaneous abortion?
  • What is the preferred Celsius temperature range for storing photographic materials?
  • When a beverage is spilled on a cassette, which component will have to be replaced?
  • Bone marrow is used as a somatic dose indicator. Radiation can cause depression in blood cell production. Which category best describes this depression?
  • Retake analysis is recommended how often?
  • In CT exposure, which unit is used to express patient exposure in the provided material?
  • Which of the following records of QC tests must be maintained?
  • Changing from SP-100 screens to SP-400 screens will reduce exposure settings and patient dose by what percent for the same film density?
  • Film darkening that detracts from film quality and provides no useful information is termed?
  • Generally, at or below how many rads will full-body x-radiation exposure show no injury with ordinary methods?
  • What happens to the focal spot as the x-ray tube target angle decreases?
  • How many monitoring devices should this personnel wear and what are they called?
  • Even a small fingernail mark may do what to the screens?
  • Which statement about the Bergonie and Tribondeau law is NOT correct?
  • Which projection would take advantage of the heel effect if the cathode was toward the head?
  • Which law describes how radiation intensity changes with distance?
  • Which of the following are among long term effects thus far observed?
  • According to animal experimentation, what is the effect of fractionating a given radiation dose over years on genetic mutational damage?
  • What is the primary purpose of standardized QC tests when abnormalities are detected?
  • Immediate notification is required when the total effective dose equivalent reaches or exceeds how many rems?
  • What is the annual occupational dose equivalent limit as set by 10 CFR 20, for the lens of the eye?
  • If humidity rises above the standard, what will occur during film handling?
  • The radiation that forms the diagnostic image on the film is called remnant radiation.
  • Which of the following are required if the operator must remain in the room during patient CT scanning? 1) protective apparel 2) gonad shield 3) personnel dosimeter.
  • When should Processor Quality Control be carried out?
  • Which document should be consulted to select the primary exposure factors?
  • Under which of the following conditions must gonads be shielded?
  • Which of the following records of QC tests must be maintained?
  • Which testing method can be used to assess Light & X-ray Field Alignment?
  • FILM Badge: Unit Range? Which unit is used for film badge readings?
  • Regarding daily checks of film washing time, which statements are true?
  • How often should you test the filtration HVL?
  • What is the recommended HVL for x-ray tubes operating above 120 kVp?
  • What is the major problem encountered in most darkrooms?
  • What does HVL stand for in shielding discussions?
  • Which of the following are required if the operator must remain in the room during a CT scan?
  • Under which conditions is a 24-hour notification to the Radiological Health Branch required?
  • How long must records of maintenance and repairs of x-ray equipment be kept?
  • Which interaction does not significantly contribute to attenuation at diagnostic radiography energies?
  • Which of the following conditions may result in grid cutoff?
  • Convert 50 rem to sieverts.
  • Which is a common artifact risk from improper handling of radiographic films?
  • Which QC parameters should be tested daily?
  • Which test device and criteria are used to verify Tank Level Checks, Clean-up Films, and cleaning crossover rollers, and how often is this performed?
  • The product of the absorbed dose in tissue, quality factor, and other modifying factors at the location of interest defines which quantity?
  • The process by which an X-ray beam is reduced in intensity by absorption or scattering when passing through material is termed:
  • Approximately what percentage of cases will require MAJOR adjustments to a radiographic technique chart?
  • Which statements are true about the inverse square law? 1) The intensity varies inversely as the square of distance. 2) As you move closer to the X-ray source, the dose increases. 3) It is best to maximize the distance between the exposure source and the person.
  • Darkroom humidity should be maintained in which range?
  • A safelight should be selected to match the film manufacturer's specifications to avoid excessive:
  • The photoelectric effect is more likely with which conditions?
  • What is the cited repeated rate for experienced x-ray personnel?
  • In radiography practice, which action directly reduces exposure to the patient when aligning the beam with the area of interest?
  • At 90 degrees from the patient and 1 meter away, the exposure measured by an ionization chamber is about what fraction of the incident radiation?
  • HVL (Half-Value Layer) is typically expressed in what units?
  • How often should the accuracy of the built-in thermometer be checked with a calibrated thermometer?
  • What is the annual occupational dose equivalent limit set for the whole body dose?
  • Which interaction produces discrete spectral lines in the x-ray spectrum?
  • What is the major tool of quality control for daylight systems?
  • Should densitometric strips be exposed to X-rays?
  • The time lag between initial exposure to ionizing radiation and the first clinically detectable effects is called the latent period.
  • X-ray equipment made of aluminum and located in the primary x-ray beam to preferentially absorb or eliminate the less penetrating x-rays before they reach a patient is called a(an):
  • The part of the X-ray beam that has gone through the patient and reaches the film is called?
  • Which item is considered a hardware error in radiography?
  • Which instrument combination is used for darkroom condition testing?
  • How often are Focal Spot Size, KVP Accuracy, Exposure Time Accuracy, and Gy/mAs, mAs Linearity & Radiation Reproducibility checked?
  • What is the usual range of the diagnostic x-ray tube anode angles?
  • During radiographic exposure, which actions are recommended to minimize exposure to scatter radiation?
  • What is the occupational dose equivalent limit for persons under 18 years of age?
  • Which condition is essential when handling film in the darkroom to minimize processing issues?
  • Which type of radiation effect has a severity that varies with dose and has a threshold, and is also known as the deterministic effect?
  • Which of the following are considered x-ray personnel errors when classifying reasons for repeated films?
  • Which statement best describes the technical advantages of 3-phase or high-frequency generators over single-phase generators?
  • Which factor is the energy-determining factor in the x-ray beam?
  • Proper film handling and film processing primarily affect which aspect of radiographic output?
  • What is the input‑output curve used to express the change in density with dose for radiographic film, also referred to as an H&D curve?
  • Which blood cell type is depressed most severely by bone marrow radiation?
  • Standardized quality control tests carried out at prescribed intervals are designed to detect which conditions?
  • Which of the following is NOT listed as a factor affecting the quantity of scattered radiation?
  • Which statement best reflects the relationship between fractionation and genetic mutational damage according to animal data?
  • What is the function of a grid?
  • How often should the darkroom fog be tested?
  • A sensitometric strip provides measurements of which properties?
  • Which tissue attenuates the most x-rays?
  • Is the CT beam well collimated?
  • What is the primary purpose of intensifying screens in radiography?
  • Genetic radiobiological effects are manifested through which mechanism?
  • In processor QC, which instrument is used to evaluate sensitometric response?
  • Which grids are recommended for pediatric radiography?
  • How often should Light & X-ray Field Alignment be checked?
  • Examinations taken with intensifying screens reduce the radiation dose to the patient by approximately what percent?
  • During diagnostic radiography, which interactions contribute to attenuation:
  • Hereditary effects and cancer incidence are examples of which type of radiation effects?
  • The projected focal spot size measured along the central axis of the x-ray tube at the image receptor is known as the:
  • Thiosulfate levels for archival film are measured in which units?
  • On a typical dose-response curve, what is the term for the dose at which there is no detectable effect (intersection with the x-axis)?
  • Which option represents the combination that reduces patient dose by limiting exposure factors to safe levels?
  • Which statement about genetic risks from radiation is most accurate?
  • Which pair of tissues has approximately the same radiographic density?
  • Which item is considered an X-ray accessory?
  • What instrument is used to measure exposure at 90 degrees to the patient at a distance of 1 meter?
  • What is the effect of all types of fog on the radiographic image?
  • Which imaging region contributes a large share of the genetically significant dose (GSD) relative to its proportion of exams?
  • Which processing error causes films to turn black with poor image contrast?
  • What is the name of the law that states this is true?
  • What is the usual range of diagnostic x-ray tube anode angles?
  • How long should you spend in the darkroom before checking for darkroom fog?
  • Bone-marrow elements that are the most severely depressed after irradiation are:
  • Which combination of features is required for mobile X-ray exposure switches?
  • What is the main reason for protecting the gonads during radiographic procedures?
  • The X-ray tube envelope that encloses a vacuum is made of:
  • Which of the following actions is essential to ensure phototimer function?
  • Which basic principles can be used to reduce radiation dose?
  • How often does the SCREEN/FILM/CASSETTE SPEED MATCHING need to be evaluated?
  • For a processor with a 90-second cycle, what is the total developer immersion time?
  • Film badge unit range is expressed in which unit?
  • Radiation-induced mitotic delay in the life cycle of a cell is:
  • Under California law, appropriate structural shielding for mobile x‑ray equipment is required when used in which conditions?
  • Which barrier is designed to attenuate stray (scatter) radiation?
  • Which humidity condition is associated with increased static marks on film?
  • Radiation-induced mitotic delay in the life cycle of a cell is:
  • Which barrier attenuates stray radiation (scatter)?
  • How is the process of film washing time measured?
  • For measuring the developer temperature, which device is recommended?
  • The process of releasing electrons from a heated tungsten filament is called:
  • ABD region x-ray examinations account for about 25% of all diagnostic x-ray exams. What percent of all repeats are from films of this region?
  • A radiation worker accidentally receives 10 sieverts. How many rads is that?
  • Which is cited as the largest contribution to unnecessary patient radiation dose?
  • Cataract formation after radiation exposure typically occurs in which time frame?
  • How often is a retake analysis recommended?
  • Which factors influence image distortion?
  • Which device shapes the primary X-ray beam?
  • Under what circumstances can hospital personnel hold a patient during an X-ray?
  • Immediate notification is required when the shallow-dose to skin or extremities reaches how many rads?
  • The technique chart is used to determine what?
  • Which of the following is the definition of half value layer?
  • Based on animal experimentation, which statements about genetic effects from ionizing radiation are supported?
  • What are the specified performance criteria for densitometric reproducibility of base plus fog, mid-density, and density difference?
  • Long-wavelength X-rays will increase which of the following?
  • Which QA tasks should be checked DAILY in film processing?
  • Which statement best describes the purpose of standardized quality control tests at prescribed intervals?
  • Violations of the Health & Safety Code are typically guilty of which offense?
  • Which factors influence patient radiation dose?
  • Which of the following are recommended to minimize retakes?
  • Under the Health & Safety Code, a violation by a person or person aiding is punishable as what offense?
  • Which of the following would NOT increase patient dose?
  • Which statement correctly describes the Gray unit?
  • How is the speed of an intensifying screen defined?
  • Using high kVp technique results in which change to exposure time?
  • The spinning target of a general-purpose x-ray tube is primarily composed of which material?
  • Which instrument is used to read densitometric values in processor QC?
  • Which statement about the line-focus principle is true?
  • During radiography of infants, when photo timing is not available, technique charts must be based on which parameter?
  • Which anatomical region accounts for approximately 25% of diagnostic X-ray examinations but nearly 40% of all retakes?
  • A parent or holder of a patient during radiography should have which of the following?
  • Which long-term effect has been observed from radiation exposure?
  • Which items are required for an operator who must remain in the room during a patient CT scan?
  • Under regulations, if there is over-exposure of a film badge, to whom should the findings be reported and within what timeframe?
  • Among the following practices, which helps reduce gonad dose during radiographic procedures (besides shielding)?
  • Reviewing and updating the facility procedures manual should occur at least:
  • How often should monitoring checks be performed?
  • Which of the following is the primary process by which x-rays are produced?
  • At what body-part thickness is the use of a grid recommended?
  • Which testing setup is used to assess X-ray beam quality, Bucky motion, and centering?
  • Which of the following are advantages of high kVp technique?
  • The definition of a high radiation area is a radiation level that could result in an individual receiving a dose equivalent in excess of:
  • Which factor does NOT contribute to nonuniform dose distribution within the body during radiography?
  • Which of the following procedures are considered high bone marrow dose examinations?
  • What test device is used for HVL measurement?
  • What term describes destructive changes in molecules resulting when radiation acts directly on a target such as DNA?
  • What is the recommended frequency for testing HVL (filtration)?
  • Which term describes all radiation coming from the X-ray tube housing excluding the useful beam?
  • Which hypothesis describes a linear dose-response relationship?
  • Which of the following are test items for daily QC?
  • Which measures are recommended to minimize retakes?
  • What is the cited repeated rate for experienced x-ray personnel?
  • Which statement describes an indirect effect of ionizing radiation?
  • Film darkening that detracts from film quality and contributes no useful information is termed:
  • Which form part of the Law of Bergonie and Tribondeau?
  • Reducing the effective focal spot size decreases geometric unsharpness but increases anode heat loading.
  • What term describes the density measurement of a film, specifically the degree of blackening on the film?
  • The secondary protective barrier includes which types of radiation?
  • What is the recommended HVL for x-ray tubes operating above 70 kVp?
  • Approximately what % of retakes are due to errors in positioning?
  • In a mobile radiography setup, which PPE should non-patient personnel wear?
  • Diagnostic X-ray beams are described as heterogeneous, polyenergetic, or polychromatic due to which interaction?
  • Examinations taken with intensifying screens reduce the radiation dose to the patient by approximately what percent?
  • What is the function of a densitometer in film processing QC?
  • Deterministic effects are characterized by which of the following?
  • Which technique change would most directly reduce patient dose without sacrificing image quality?
  • Which of the following is a deterministic (non-stochastic) effect?
  • The SI unit commonly used for dose equivalent is:
  • Which of the following reduce patient radiation dose?
  • Only about what percent of incident photons emerge from the patient unaffected?
  • If a radiographic procedure uses no intensifying screens, what is typically required to achieve acceptable image density?
  • Which term describes the barrier used to attenuate leakage and scattered radiation?
  • Abdominal radiography accounts for 25% of all radiography examinations but contributes over what percent of the gonad dose (GSD)?
  • Which protective measure must be used on children and potentially procreative patients when feasible, without compromising diagnostic information?
  • Which of the following can produce film fog?
  • The collimator light beam helps align the x-ray beam with the correct patient anatomy and the ______?
  • Gonad dose variation among facilities is influenced by exposure factor selection, plus which of the following?
  • What is the average accuracy of a thermoluminescent dosimeter?
  • Which of the following can be used to determine barrier thickness (shielding) needed to attenuate radiation to the required degree?
  • The darkroom should be properly illuminated, with film correctly matched to illumination using a lamp of what wattage range?
  • Which electron interaction with the anode causes the x-ray beam to be polygenergetic?
  • For personnel monitoring, which two devices are the primary/sufficient/required pieces of equipment?
  • Gonadal shielding is indicated under which of the following conditions?
  • The x-ray tube envelope's primary function is to:
  • What is the quality factor for X-ray, gamma, or beta radiation?
  • Which of the following best describes the general term for radiation-induced reduction in blood cell production?
  • For film storage, which practice helps prevent damage to unexposed film?
  • What is the Half-Value Layer (HVL) defined as?
  • If the darkroom, processor, and processing techniques are not optimum quality, what cannot be produced?
  • How many 14x17 films must be processed daily to maintain consistency in most automatic film processors?
  • Which radiographic exam typically uses a 72-inch target-to-film distance instead of the standard 40-inch distance?
  • How should you verify the processor standby units in a radiographic processor system?
  • What device and frequency are recommended for the developer temperature test?
  • Which of the following is cited as the largest contribution to unnecessary patient radiation dose?
  • Approximately what percentage of retakes are due to motion (respiratory or other)?
  • Sensitometric strips should be exposed to which type of light?
  • Which of the following represents the minimum repeat rate threshold for inexperienced x-ray personnel?
  • Which term describes the energy imparted by ionizing radiation per unit mass of irradiated material?
  • Operator exposure from CT exams is generally very LOW b/c:
  • There is an increased risk in children if the expectant mother is exposed to radiation. Which conditions are included?
  • Which of the following is referred to as a 'technical' or 'hardware' error in radiography?
  • Which of the following QC parameters are tested annually?
  • What is the definition of one rad in terms of energy absorbed per unit mass?
  • Which of the following tissues have approx. the same density?
  • Which item is included in daily Processor QC checks related to temperature?
  • Which elements are included in x-ray equipment performance evaluation as part of QC testing?
  • Which statement correctly identifies the monthly QA parameter two for film processing?
  • What device is used to measure the optical density of an exposed and processed radiographic film?
  • Which operator console knob controls x-ray beam quality?
  • Which of the following statements about Bergonie and Tribondeau law is NOT true?
  • The average film badge dose measurement accuracy is approximately what percent?
  • The option that describes an equipment and accessory failure or 'technical error' is which?
  • Which grid configuration is described as stationary and fine-line?
  • Darkroom film fogging must be eliminated because it:
  • Which barrier attenuates scatter radiation in radiographic facilities?
  • What is the typical tolerance for film washing time measurement?
  • Which pairing correctly describes film-screen selection and exposure settings for low-dose radiography?
  • GSD stands for Genetically Significant Dose.
  • Which statement about beam restriction is true?
  • The normal level of illumination in a given area is described by which term?
  • To limit stochastic effects, which statements align with acceptable supervisory practice?
  • Which of the following are results of weak fixer solution?
  • Scratches on films are caused by which of the following?
  • Which combination of image characteristics is measured by a sensitometric strip?
  • Gross cellular effects from exposure to ionizing radiation can include which of the following?
  • Which region accounts for approximately 25% of diagnostic X-ray examinations but about 40% of retakes?
  • Which statement about x-ray generator configurations is true?
  • Which projection would take advantage of the heel effect if the cathode end is toward the head?
  • If the distance from the X-ray source is doubled, the exposure rate becomes what fraction of the original?
  • Generally, at ____ rads or less, full body x-radiation exposure, ordinary lab or clinical methods will show no indication of injury.
  • How and when should the Developer & Fixer replenishment rate be checked?
  • The density of all patient-equivalent phantom films should be within what percent of the average density?
  • Which statement is true regarding cataracts in relation to radiation exposure?
  • What is the recommended storage temperature range for photographic materials used in radiography?
  • Which statement best defines HVL?
  • If the operator is required to stay in the room during scanning, which two items should be worn?
  • Most occupational exposure comes from which source?
  • Which items are included in a standard visual inspection of a darkroom environment?
  • In diagnostic radiology, reasons why radiation doses are not distributed uniformly throughout the body include:
  • Whose responsibility is establishing and updating the radiography procedures manual annually?
  • Which combination of factors influences the biological effects of radiation?
  • Which statement best describes common causes of film artifacts such as static electricity, fingerprints, and crinkle marks?
  • What is the name of the law that explains increased radiosensitivity in tissues with high mitotic activity and many undifferentiated cells?
  • SCREEN LAG refers to:
  • The repeat rate for inexperienced or careless x-ray personnel is equal to or greater than what percentage?
  • What is the main purpose of a filter?
  • Which factors can be directly influenced by X-ray personnel during day-to-day use?
  • In semi-annual testing for collimator light field and X-ray field alignment, which statements are true?
  • Which statement best describes collimation recommendations?
  • Exposure adjustments for a patient with emphysema?
  • What is phototiming used to achieve in radiography?
  • Which of the following are technical advantages of 3 phase or high frequency generators over single phase generators?
  • To restrict the x-ray beam in radiography means the same as to
  • A radiation worker not wearing protective apparel spends 10 minutes inside an enclosed area. The exposure rate was 100 mrem/hour. What dose did he receive?
  • Which statement about the effect of filtration on patient dose is true?
  • Why should film fogging be eliminated in radiographic processing?
  • When x-raying a patient with emphysema, which technique adjustment is recommended?
  • Bone marrow is affected as a somatic dose indicator. Which cell type will be depressed most severely?
  • What is the approximate difference in exposure intensity between the two edges of a 14x17 film due to heel effect?
  • Filtration's effect on the beam spectrum is best described by which statement?
  • CT skin dose is typically on the order of which range?
  • If the darkroom, the processor, and the processing techniques are not optimum quality, what is impossible to produce?
  • 24-hour notification is required if an individual has received an eye dose exceeding what?
  • The traditional unit for absorbed dose is what?
  • Filtration in an x-ray system serves what purpose?
  • What is the primary purpose of gonadal shielding?
  • The optical density of a film due to the base density plus the action of the developer on the unexposed silver halide crystals is termed?
  • In Bremsstrahlung X-ray production, energy conversion occurs when the KE of electrons is transformed into electromagnetic radiation.
  • Which of the following statements is true regarding gonad dose when shielding is used and internal scatter is present?
  • In the context of imaging very small patients, which component is a limiting factor?
  • Which statement describes the effects of ionizing radiation on cells?
  • Which term describes the optical density of a film due to its base density?
  • Therapeutic abortion is recommended after embryo/fetus exposure exceeding what dose?
  • A radiation worker accidentally receives 10 Sv full-body X-radiation dose. How many rads did he receive?
  • Regulations require the supervisor to report findings of film badge over-exposure to the RHB within how many days?
  • What is the annual occupational dose equivalent limit for the whole body?
  • An area outside of a restricted area, access to which can be limited by the licensee for any reason is defined as?
  • Which item is not listed among the six direct factors influencing X-ray personnel performance?
  • Which combination of checks is typically used to verify darkroom storage conditions?
  • Which SID is commonly used to reduce heart magnification in chest radiography?
  • What is the trade-off of using a radiographic grid?
  • An area, outside of a restricted area, access to which can be limited by the licensee for any reason is defined as?
  • Why do intensifying screens reduce the patient's radiation dose?
  • Which interaction primarily produces the continuous spectrum in diagnostic x-ray beams?
  • When imaging infants and very young children, if photo timing is not available, technique charts should be based on which patient characteristic?
  • How often must GRID UNIFORMITY / BUCKY GRIDS / GRID CASSETTES / CLIP-ON GRIDS and GRID ALIGNMENT be evaluated?
  • Which X-ray interaction with matter predominates in soft tissue above 80 kVp?
  • In the patient’s exit path of photons, what percent of incident photons emerge from the patient unaffected?
  • Which type of radiation produces photons with discrete energies corresponding to atomic transitions?
  • Compared to a patient with pneumonia, an emphysema patient will require exposure that is:
  • Regarding film handling, which statement is true?
  • Rare-earth intensifying screens require films sensitive to which spectrum?
  • What is the approximate patient skin dose for CT examinations?
  • In pediatric radiography, which can be omitted to decrease patient dose?
  • Underpinning ALARA philosophy are the following assumptions: 1) there is no minimum threshold for radiation dose necessary to achieve a biological effect 2) all radiation doses be kept as far below legal limits as possible 3) even the lowest radiation dose is assumed to result in some effect.
  • How often should an analysis of the number of retakes be performed?
  • Which of the following are LONG TERM effects from exposure to ionizing radiation?
  • Approximately what percentage of radiographic technique chart cases require minor adjustments?
  • Which of the following are components of a typical collimator?
  • QA and QC records shall be available for review by which group?
  • Where should a personnel monitoring device be worn during work hours?
  • Which of the following is among long-term effects thus far observed?
  • In personnel monitoring, film and TLD badges are considered what?
  • To evaluate GRID UNIFORMITY and GRID ALIGNMENT, what is the recommended method?
  • In radiography, which parameter is most commonly associated with adjusting the beam quality?
  • Which item is used to measure film density as part of a QA program?
  • Which blood cell type is depressed most severely by radiation?
  • CT skin dose is typically on the order of which range?
  • Which of the following are factors affecting scattered radiation?
  • Scattered radiation coming from the patient, compared to the primary incident radiation, is:
  • Which of the following are disadvantages of using pocket ionization chambers as personnel monitoring devices? 1) limited dose range 2) no permanent record 3) subjective evaluation of reading by wearer.
  • Remnant radiation is best described as the radiation that:
  • Exposure to scattered radiation is directly proportional to which factor?
  • Calcium tungstate intensifying screens require films sensitive to which color band?
  • Which projection would NOT benefit from the heel effect when the cathode end is directed toward the head?
  • Which of the following are factors that directly influence the patient dose controlled by X-ray personnel?
  • In diagnostic radiography, the aluminum placed in the path of the primary beam to reduce low-energy photons is known as
  • For daylight systems use, which of the following should be checked and reported?
  • Which option best describes the daily check for the wash-water temperature and water filters?
  • Indirect effect in radiobiology is primarily caused by radiation interactions with which cellular component?
  • What is the regulatory provision for occupational exposure of a declared pregnant woman per month?
  • If the gonads are properly shielded with 0.5 mm lead equivalent, approximately what percentage of the incident primary beam radiation dose can the gonads still receive from internal scatter?
  • To restrict the x-ray beam in radiography means the same as to:
  • What is the name of the process by which an X-ray beam is reduced in intensity by absorption or scattering as it passes through material?
  • Which of the following cause the FILMS to SMELL and turn YELLOW over time?
  • A barrier used to attenuate stray radiation is termed?
  • Which of the following is a direct cost-saving goal of a QA program?
  • Which two tissues have approximately the same radiographic density?
  • Which processing error causes films to turn yellow-brown and smell like sulfur?
  • In annual Gy/mAs testing, which devices are used?
  • Which tissue absorbs the most x-rays?
  • Gonads should be shielded if they lie within what distance of the primary beam?
  • How long must records or written logs of maintenance and/or repairs of x-ray equipment be kept?
  • Which set of factors is cited as contributing to wide variation in gonad dose between facilities?
  • The density difference is usually measured between which optical density values above base-fog level?
  • At which thickness is grid use commonly recommended in clinical practice?
  • Which of the following are required if the operator must remain in the room during patient CT scanning?
  • Which statement best describes the effect of generator configurations on patient dose and image quality according to the material?
  • Daily verification of wash-water temperature and water filters should be performed by which method?
  • Bremsstrahlung X-ray production involves the conversion of which type of energy of electrons into electromagnetic radiation?
  • Which of the following is directly proportional to the dose delivered to the patient?
  • Which statement best describes the dose-reducing technique chart guidance?
  • (0.1mrad/hour) X (hour/60 min) X 10 min X 10 (QF)= ?
  • The portion of the focal spot that contributes to image formation is called the...
  • Which of the following cannot be directly influenced by x-ray personnel during routine operation of x-ray equipment?
  • Damage to the INDIVIDUAL irradiated is termed:
  • Which dose value corresponds to the dose at which deleterious effects can be observed in embryo/fetus?
  • What is the function of the filter placed in the useful X-ray beam?
  • What happens to radiation intensity if the distance between the source and the object increases?
  • Dose equivalent is expressed in which units?
  • Which are conditions that may result in grid cutoff?
  • The FOCAL SPOT SIZE, KvP accuracy, exposure time accuracy, and GY/mAs, mAs linearity and radiation reproducibility are checked on what schedule?
  • What is the main reason for protecting the gonads?
  • What term describes the length and width of the x-ray beam as projected down the central axis of the x-ray tube?
  • What is the approximate range of potential difference used in diagnostic radiography?
  • The ratio of image size to object size is called what?
  • The heel effect is more pronounced with which condition?
  • Abdominal region retakes constitute about what percentage of all retakes?
  • Absorbed dose and dose equivalent units?
  • Which means of x-ray production involves projectile electrons knocking out inner shell electrons of tungsten?
  • If the distance between the X-ray source and the object increases, what happens to the radiation intensity?
  • What is the recommended HVL for x-ray tubes operating between 50-70 kVp?
  • The dose-response curve associated with cataract formation is best described as which type?
  • What is a primary purpose of standardized quality control tests performed on radiography equipment?
  • In semi-annual collimator alignment testing, which device is used as the primary test device?
  • Which factors influence the quantity of scattered radiation?
  • Should the densitometric strips be exposed to X-rays?
  • What is the function of the radiographic grid?
  • Which will reduce patient radiation dose?
  • What happens to the focal spot as the x-ray tube target angle decreases?
  • For film archival, thiosulfate levels calculated from fixer retention testing should be ____ mg/cm2.
  • What is the average accuracy of a film badge?
  • Which measures reduce staff exposure to scatter radiation during radiographic procedures?
  • In a radiography suite, what barrier attenuates the primary useful beam?
  • The optical density that would result if an unexposed film were processed through the fixer, washer, and dryer, WITHOUT FIRST PASSING through the developer is termed:
  • The term used for shielding integrated into the x-ray tube assembly is:
  • The darkroom lighting should be properly illuminated with what wattage range for the bulb?
  • What are the performance criteria for the processor densitometric evaluation?
  • Which combination reduces patient radiation dose?
  • Regarding automatic film processing, which condition is addressed by replenishment formulas?
  • Under California law, shielding is required for mobile x-ray equipment in which combination of conditions?
  • Which statement about QC records is most accurate?
  • In radiobiology, which statement about thresholds for genetic damage is supported by the data described?
  • What factor is considered more critical to film quality than the best darkroom equipment?
  • Somatic radiation damage refers to effects on whom?
  • Which statement best describes holding a patient during an X-ray and the required protection for the holder?
  • For mobile X-ray units, can the exposure switch be the dead-man type?
  • Which projection would take advantage of the heel effect if the cathode end is directed toward the head?
  • Which term describes the crest value of voltage applied to the X-ray tube?
  • A grid primarily absorbs which type of radiation?
  • Approx. what % of cases will require MAJOR adjustments to a radiographic technique chart?
  • Which action is considered one of the most important in avoiding unnecessary radiation exposure to the patient?
  • Which of the following is a genetic effect from exposure to ionizing radiation?
  • What is HVL used to measure in the X-ray beam?
  • Which statement best describes the effects of humidity on film quality?
  • Which combination of factors determines the genetically significant dose (GSD)?
  • What happens to the intensity of radiation when the source is moved farther from an object?
  • In processor QC, the mid-density target is around which optical density?
  • Which humidity ranges are associated with issues in film handling?
  • If X-ray intensity is 100 mrem/hr at 1 meter FFD, what is the intensity at 4 meters?
  • Which statement is true about the x-ray tube anode?
  • X-ray penetration (quality) is determined by which factor?
  • 24-hour notification is required if an individual has received overexposure within 24 hours: Total effective dose exceeding what?
  • Abdominal radiography accounts for 25% of all radiography but contributes over ______% of the genetically significant dose (GSD).
  • Stray radiation includes leakage and scatter; what term describes radiation not serving a purpose?
  • What is the useful optical density (O.D.) range for radiographs?
  • What can developer solution or cigarette ashes produce on the radiographs?
  • Which statement is NOT listed as an advantage of 3-phase or high-frequency generators over single-phase generators?
  • In annual Gy/mAs testing, which devices are used?
  • What is the recommended HVL for x-ray tubes operating above 120 kVp?
  • How often should the screen/film contact be checked?
  • The energy imparted by ionizing radiation per unit mass of irradiated material is known as which quantity?
  • Immediate notification is required for an eye dose equivalent of how many rems?
  • What device is designed to measure the optical density of an exposed and processed radiographic film?
  • X-ray examinations of the abdomen account for 25% of all radiography yet contribute over what percentage of the gonad dose (GSD)?
  • Which device is used to measure HVL?
  • Which of the following describes fog types encountered in radiography?
  • When evaluating grids, a radiograph should be produced at approximately which density on the film?
  • Infants and very small children may not be imageable with X-ray equipment utilizing which feature?
  • What is the standard lead-equivalent thickness for protective gloves used in radiology?
  • Which QC parameters should be tested annually?
  • Daily checking FILM WASHING TIME: which statements are true?
  • Which operator console knob controls x-ray beam quality?
  • Which statement about HVL and higher kVp is true?
  • Where should a personnel dosimeter be worn on the body?
  • What is the major tool of quality control for daylight systems?
  • Planar radiography doses are typically in the millirad range. Which option represents millirads?
  • Gonad dose variation across facilities is due to variation in exposure factors plus: 1) variation in collimation 2) improper film development techniques 3) failure to use gonad shielding
  • Which of the following describes what the photographic process control includes?
  • Under California law, shielding for mobile x-ray equipment is required when the device is used in which settings?
  • What is the acceptable deviation for Light & X-ray Field Alignment relative to source-to-distance?
  • Maintenance records for x-ray equipment should be kept for how long?
  • The density difference in densitometry is typically measured between which optical density values?
  • Radiobiological effects that first appear minutes, days or weeks after exposure are termed?
  • How does skin pigmentation affect exposure factors?
  • Which means of x-ray production involves projectile electrons knocking out inner shell electrons of tungsten?
  • Which daily QC practice for daylight imaging systems is best described?
  • Which hypothesis assumes that a dose–effect relationship derived from high-dose-rate data can be extrapolated to lower doses and to zero?
  • How often should Light & X-ray Field Alignment be checked?
  • The barrier thickness used to attenuate the X-ray beam by half is described by which term?
  • Primary cost savings of a QA program include which of the following?
  • Which statement about filtration and patient dose is true?
Subscribe

Get the latest from Passetra

You can unsubscribe at any time. Read our privacy policy